That’s the gist of the overall procedure. If you are in a hurry, I hope you find this short information worthy of following the process. 

But if you don’t want to damage your expensive fridge. It’s better to learn in detail. This guide will tell you everything about how I removed my fridge sticker and sticker residue with real photos. 

So get in touch…

Sticker left glue is like a magnet that pulls dirt or grime toward it. Removing stickers and sticker residue from the fridge isn’t a big deal. Many home ingredients can do the job. But, you should clearly know some points before using any home product. Such as

1. What is the surface of your fridge from where you want to remove sticker glue? (Stainless steel, Glass, Plastic, etc.)
2. What is the sticker type? (Paper, Vinyl, etc.)
3. Which glue is used to attach the sticker? (Cyanoacrylate Superglue, Epoxy Adhesive, etc.)
4. What is the condition of the sticker glue on the fridge? (Light, deep, stubborn, etc.)

Knowing the information will help you to use glue-removing products and avoid fridge damage.  

But thinking how to know the information? 

Very simple. Carefully look at the fridge, and you’ll get the answer to questions 1,2, and 4. Since you have got 3 questions answered out of 4. That’s good for determining your glue-removing household products.

Let Me Tell You About My Experience…

When I looked at my fridge, I found my fridge surface is glass-molded plastic with paper stickers.

Peeling the sticker with your fingernail from one corner is the easiest way to remove a sticker from the fridge surface. If you don’t have long, sharp nails, use a plastic spatula or putty knife edge.

I Used 

Step 1: Apply Hot Air

First, I plugged in my blow dryer, pushed the “On” button. After that, I held the dryer 2-3″ far away from the sticker to apply hot air, but not to damage the fridge surface. After applying the heat with hot air for 1 minute, it loosened the glue. 

Step 2: Peel The Sticker 

As the sticker had already lost its glue, I lifted one corner and peeled it off with a putty knife. 

Mild remedies (soapy water, cooking oil, mayonnaise, or toothpaste) can remove sticker glue. Application, rubbing, and wiping are the steps to clean. 

I Used 

• Wipe clothes 
• Toothpaste
• An old toothbrush 

Step 1: Cleaning Paper Sticker Residue

As the paper sticker left paper residue after peeling, I had to first clean the paper residue. Gently rubbing the surface with a wipe cloth, I removed the residue.

Step 2: Applying Toothpaste 

Then I put a teaspoon of toothpaste on the old toothbrush. Rub the gluey sticker area in a circular motion with it. As a cleaning agent, toothpaste contains sodium bicarbonate. This agent cleaned the glue residue within 1-2 minutes of rubbing. 

Step 3: Clean The Toothpaste 

Finally, I wiped the fridge surface with a damp cloth to remove the toothpaste and glue residue.

Step 4: Dry the surface

It’s better to wipe the fridge with a paper towel or dry cloth to instantly dry the fridge. You can also air dry. 

Using goo gone, rubbing alcohol, or WD-40 is worthwhile to remove the sticker glue from the stainless steel fridge within 2 minutes. Just spray/apply the cleaner on the gluey texture, wait a minute to break the glue strength, and wipe with a clean microfiber cloth. That’s it. 

The Things You’ll Need

Step 1: Spray Goo Gone

Open the WD-40 nozzle cap and spray a little amount of cleaner. Don’t spray too much, as the extra cleaner will run down where you don’t need it. 

Step 2: Wipe The Gluey Area

After waiting 1-2 minutes, gently wipe the surface with a soft, clean, damp microfiber cloth. The glue residue will come off with the cloth. Again wipe the fridge with a dry cloth. 

Use 1:1 white vinegar and baking soda paste on the sticker glue surface of your appliance. Wait 2-3 minutes, rub the paste to break the glue strength, and rinse it with clean water.

Either the manufacturer’s sticker or your attached sticker on the fridge looks good when they are new. But, as time passes, they lose their shine and become a source of dirt or grime. So removing the sticker and its glue is a must to rejuvenate the excellent appearance. 

I hope you find my guide to removing sticker glue from the fridge easy to follow and helpful. 

• Facebook
• Twitter
• LinkedIn
• More

The post How to Remove Sticker Glue from Fridge appeared first on Tiny Helping.

So grabbing a cup of green tea, and sitting on my desk I start editing how to glue a puzzle for framing that I wrote last night. Beside me, my 6-year-old niece, Helen, was playing. 

But, suddenly, he dropped a droplet of super glue on my keyboard’s ‘Enter’ button. 

Yikes! 

Have you ever faced this weird accident? 

Want to learn how to remove super glue from a laptop keyboard without damaging its surface? 

Fortunately, I managed to remove the super glue from my keyboard and bring its aesthetic look.

Shall I explain…

A keyboard has many holes in its surface. Leaving a day without this electric gadget is a nightmare as a blogger. So first, I keep in mind its construction materials to avoid damage. Since the keyboard is made of ABS and PBT plastic. So removing glue from the keyboard is the same as removing glue from plastic. 

It’s a 5-minute task to get rid of glue from a laptop keyboard with 70% isopropyl alcohol. Here’s the process 

Note: Acetone nail polish remover effectively removes glue from most surfaces. But you shouldn’t use it on the keyboard as it may fade its color or do a little damage. Most probably, you don’t want that. 

Step 1: Gather The Required Things

Though to remove glue, you won’t need too many things. But you should keep a few things at your fingertips to clean the keyboard with no damage or sticky residue. 

• 70% isopropyl alcohol
• Microfiber clothes 
• Soapy water
• Paper towel

Step 2: Glue Dissolving 

Damp one end of the microfiber cloth with alcohol. Gently rub the glued keyboard area in a circular motion with the dampened cloth for 1 minute. The chemical of the alcohol will dissolve the glue. 

Step 3: Clean The Glue 

Pick another microfiber cloth and soak it in soapy water. Squeeze the cloth to remove extra water because the extra water may run and enter into the keyboard’s holes. It may damage the key’s internal parts. Now, wipe the keyboard with it until there is no glue residue. 

Step 4: Dry The Keyboard 

As a finishing touch, wipe the keyboard with a paper towel to dry it. It’ll be better if you wipe the entire keyboard to remove air, dust, and debris. So it’ll look like a new one. 

The laptop and desktop keyboards are the same except for size, layout, and key switch types. So, removing glue from the desktop keyboard is 100% the same as a laptop keyboard. 

Many home ingredients are also effective in removing glue from the keyboard if you don’t have 70% isopropyl alcohol at home. No need to buy them. White vinegar and baking soda magically remove the glue, sticky texture, and stains from the keyboard. 

Process 

• Mix 1:1 white vinegar and baking soda to make a paste-like toothpaste. 
• Apply the remedy on the keyboard’s gluey area with a cotton bar. 
• Keep it resting for 15 minutes to weaken the glue’s strength. 
• Scrub the surface with a cotton swab to loosen the glue. 
• Wipe the surface with a damp microfiber cloth to clean the glue. 
• Again wipe the wet keyboard with a dry cloth and air-dry the space. That’s all.

• Don’t directly pour rubbing alcohol on the keyboard as it can be runny and get into the internal parts of the keyboard and cause a catastrophe. 
• If you have sensitive skin, it’s better to wear hand gloves and a face mask while using alcohol to avoid skin irritation and fume inhaling. 
• Must wash your hand with hand wash after completing your task to avoid chemical contamination.

As you now know, the process of removing super glue from laptop keyboards. Jump-start to remove glue from the keyboard and save your investment. 

Hit the comment section, and let me know your experience. I love to hear. If you have questions about glue (types, application, strength, removal), you can leave it also. I will try to write about that topic in my next blog based on my knowledge and experience.

• Facebook
• Twitter
• LinkedIn
• More

The post How to Remove Super Glue from Laptop Keyboard and Dekstop appeared first on Tiny Helping.

In that case, you have to learn how to remove glue from concrete? 

Using hot water and a chisel blade is the easiest way to remove glue from the concrete floor with less effort and hassle. This method is applicable for a small amount of glue and small to medium-sized rooms. But for a large size room, you have to use an oscillating tool to make the work faster. 

Here, I’ll describe multiple methods of removing glue from concrete floors and attach a YouTube video that I made for you. So, let’s get to the point.

Some multiple options and tools are effective in removing adhesive from concrete. You have to follow the methods depending on the surface, types of adhesive, and its condition. 

The Things You Need

• Hand gloves
• Goggles
• Hot water
• A chisel blade

Process

Step 1 – Wear safety gears

Self-care is the best care, so first, wear your safety gear and get ready for the job. 

Step 2 – Boil the water

Put a large saucepan on the stove by filling it halfway with water. Now, fire the stove and boil the water until it reaches 90°c or 198°f temperature. 

Step 3: Pour the hot water on the adhesive

Stop the stove and carefully pour the hot water over the concrete floor from where you want to remove the adhesive. Now, wait a few minutes until the water becomes cool that you can handle.

Step 4: Remove the adhesive

Now, it’s time to remove adhesive from concrete with the chisel blade. After removing, clean the loose adhesive, and wipe the space with a dry cloth. 

Tip: If you have to remove adhesive from a large room, go section by section to make the work easier. To get visualisation, check this YouTube video. 

That’s the general discussion of removing glue from concrete floors. But, different types of glue are used on concrete while installing other floors. So, if you try to remove the glue by considering its type and conditions, that will be more effective. 

Once you pull off the carpet from the concrete floor, you’ll find the space massy with concrete glue. If you don’t know how to remove yellow carpet glue from concrete, you find yourself in the middle of the sea without knowing how to swim. 

Relax; you can remove the glue with Blue Bear Mastic & Adhesive remover, and a little elbow grease. You can buy this best adhesive remover for concrete from your nearest hardware shop or online eCommerce sites like Walmart.  

The Things You Need

• Blue Bear Mastic & Adhesive remover
• A putty knife

Process

• First, apply the adhesive remover on the floors and wait a few minutes to work its component against the glue strength. 

• Now, scrape away the glue residue from the floor with the putty knife and its short strokes. 

Undoubtedly, vinyl is trendy in the flooring industry in the USA because of its low price. However, heating is the easiest and most innovative method for removing vinyl glue from concrete floors. 

The Things You Need

• A hairdryer
• A pole Scraper
• Hot water

Process

• Apply heat on the glue surface of the floor with the hair dryer for 2-4 minutes, as you usually use it to dry your hair. 

• The glue will be soft due to hot air, so now scrape the soft glue gunk with the pole scraper. 

• If you find the glue is not coming, you can pour some hot water to apply more heat. 

• Then, again pry away the glue with the pole scraper.

Noticing glue residue on the concrete after uninstalling the linoleum floor is a common scenario for most homeowners like you. But don’t panic, as removing glue residue from concrete isn’t a tedious job if you know how to do that. 

The Things You Need

• Clothing iron
• Newspaper or cardboard
• Scraper blade

Process

• First, spread multiple layers of newspaper or one layer of hardboard on the glued area. 

• Connect the iron with electricity, set it on low heat, and press the hot iron over the newspaper or cardboard.

• The heat will loosen the glue residue, so you can easily remove that loosened glue by scraping with the scraper blade. 

Note: This method will be beneficial for a small amount of glue. For large-scale glue removal, you find the process irritating and inefficient. 

Did you spill glue on your concrete floor while bonding fabric to wood? Don’t worry; you can efficiently remove the glue spots from the concrete with white vinegar and baking soda. 

The Things You Need

• 2 parts of white vinegar
• 1 part of baking soda
• A dull butter knife
• A soft rag

Process

• Make a paste with vinegar and baking soda, apply it to the glued area, and wait for a few minutes. 

• When the glue dissolves, scrape them away with the dull butter knife. 

• Finally, clean all the removed glue and wipe the space with a damp clean rag.

Note: You have to apply hot water and the scraping method for large-scale floor glue removal to get the best result with less effort.

Once you have done your home improvement work, you’ll discover there is left glue either and neither on your concrete floor. By softening the glue, you can remove it. 

The Things You Need

• An electric heat gun
• A floor scraper
• Mineral spirits
• A soft cloth

Process

• First, apply heat to the glued area with an electric heat gun. If the glue becomes soft, scrape with a floor scraper.

• Now, damp clean cloth with mineral spirits and wipe the surface to clean any loosened glue chunk. 

Note: Hold the heat gun from 15-20 inches far from the surface and be careful. As if you come in contact with heat, your skin may burn

After pulling the parquet flooring, it will leave glue residue on the concrete subfloor. You can use an angle grinder to remove glue from concrete floors for large room glue removal. 

If you already have an angle grinder, that’s fine. But if you don’t have one, no problem. You can choose DEWALT Angle Grinder. 

The Things You Need

• Facemask
• An angle grinder
• A broom

Process

• The angle grinder will create dust when you remove glue from the concrete, so first, you have to wear a facemask to avoid inhaling dust. 

• Now, run the grinder, and hold it over the floor to remove glue. 

• Once you complete removing glue, clean the dust with a broom and throw them in the waste bin. 

Want to remove tile glue from concrete? Applying hot water and scraping is the most common and effective method. As handling hot water is risky, many people don’t like to follow this method. 

Is there any alternative option instead of using hot water? Absolutely, Goo Gone works best against any glue, sticky residue, grease, and grime to remove. 

The Things You Need

• A gallon of Goo Gone
• A plastic scraper

Process

• Wet the concrete floor with Goo Gone from where you want to remove tile adhesive. 

• When you purchase Goo Gone, you’ll get a plastic scraper. So grab the scraper, and scrape the loosened adhesive until there is no adhesive residue left. 

Fortunately, removing glue from concrete will be cost-free if you do it yourself with hot water and a putty knife. If you use a professional floor scraper, that will cost $10. 

On the other hand, it costs approximately $20-$100 if you use any concrete floor adhesive remover. 

If you use an angle grinder, you must invest around $100 to own the tool. 

If you hire professionals to remove glue residue from your concrete floor, the cost range will vary depending on your location, the size of space, and gluing condition. 

So there is no fixed cost range of removing glue from the concrete floor. 

• Always wear safety gear for safety assurance. 
• Keep your first aid medical toolbox near your hand so that you can take first aid as soon as possible for any emergency case. 
• Keep kids, and pat out the space when you do the work. 
• If you have to deal with a large glue removing project, initially divide the space into some sections. And then complete one section and go to another. 

FAQs

Yes, muriatic acid removes glue from concrete. However, you can efficiently and safely remove glue from concrete with muriatic acid as it is eco-friendly, 100% biodegradable, and non-fuming. To remove glue from concrete with muriatic acid, follow the instructions

1. Spray the acid on the concrete and let it work for 8-10 minutes.
2. Apply a solution by mixing one cup of ammonia in a bucket of water.
3. Scrape the loosened glue with a scraper blade from the concrete floor. 

Using a commercial pressure washer to remove glue from concrete is risky but not impossible. If you aren’t careful while running the pressure washer on the concrete floor, it may damage the top surface. You’ll find it challenging to get fineness of the floor after removing glue with the pressure washer. 

So it is not recommended to use a pressure washer for removing glue from concrete floors. Instead, it’s better to use any solution that makes the glue soften and loosen for removal. 

I hope you find the guide and YouTube video on how to remove glue from concrete helpful. 

To better understand, re-read the instructions, prepare your tools and yourself, and start your DIY job of removing glue from concrete. 

If you want to learn more DIY skills about gluing, leave a comment by mentioning that. I love to write my next post on it. 

• Facebook
• Twitter
• LinkedIn
• More

The post How To Remove Glue From Concrete? appeared first on Tiny Helping.

I have a Bluetooth speaker to connect it with my phone to boost up its sound. However, the Bluetooth speaker’s back has a rubber coating, and one day I spilled glue on it when repairing a broken glass. 

I have learned how to get glue off from rubber to make my speaker glue free. In this post, I’ll share multiple methods for removing glue from anything made with rubber. So let’s see how

As I remove my speaker’s glue with the products available at home. And I also don’t want you spending your hard-earned bucks on this. So first, let me tell you how you use oil, toothpaste, soapy water, and other things to serve your purpose of removing glue from rubber. 

Method 1- Using oil (What method I followed)

As it was my speaker and it is an electronic device, the speaker would be damaged forever if water entered it. So I used the oiling method to remove the glue. 

The Things You Should Prepare

• Any cooking oil
• A dull scraper
• Cotton swab
• Soapy water
• Soft cloth

Step 1

First, I soaked the glued area of the rubber surface of my speaker with oil and let the lubricant dissolve the glue. 

Step 2

Then I scraped the soft glue with a dull scraper like a teaspoon’s handle flat edge. You can do it with a butter knife. 

Step 3

Once I noticed there is less soft glue that I can’t scrape, I cleaned these with a cotton swab. 

Step 4

As glue and oil make the rubber speaker sticky, I cleaned this stickiness by wiping it with a soapy water-damped cloth. 

Step 5

In this step, I kept the speaker in an airy space to dry it. 

Note: You can follow this method using toothpaste, mayonnaise, and peanut butter. Since oil is the most available item at home, I used it. 

Any glue, especially super glue, gets hard within minutes. However, it’ll be easier to remove if you notice getting your rubber phone case or anything super glue when it is liquid. 

But, don’t worry, applying heat will help you regain its liquid form and remove it. 

The Things You Should Prepare

• Any heating source (An hair dryer, heat gun, iron)
• Sponge
• Soapy water
• Soft cloth

Step 1

Hold your hair dryer on the glue-affected area of the rubber surface from 7-8 inches far as you hold it to dry your hair. 

Step 2

Apply heat for 2-3 minutes to melt the hard superglue. 

Step 3

When the glue is soft, clean it with a sponge or rag. 

Step 4

Now, rinse it with soapy water (if that won’t damage it) or wipe it with a damp cloth. 

Note: As excessive heat may damage the rubber surface, you should set the hair dryer on low heat. You also shouldn’t apply heat to one space for more than 2-3 minutes. 

Won’t those two methods work for your too much glue gunk on rubber shoes? It’s the last option to use a compatible glue remover that quickly removes glue from metal, leather, to rubber. 

The Things You Should Prepare

• Goof Off
• Cotton pads
• An old toothbrush
• Soft cloth

Step 1

Spray a few drops of Goof Off on the rubber glue-affected surface, or you can soak the cotton pads with Goof Off and wipe it on the space. Now, wait a few minutes to break down the glue. 

Step 2

Rub the soaked space with the toothbrush to scrape the glue chunk. Do it repeatedly to ensure no glue is left there. 

Step 3

Saturate a clean cloth with soapy water and wipe it on the gluey rubber to remove its leftover glue residue. 

Step 4

Again wipe the rubber with a clean water-soaked cloth. 

Rubber shoes are commonly used to get excellent traction and prevent slippery falling. But, sometimes chewing gum or any other glue may stick to it. As rubber shoes can be cleaned with water, you can comfortably use soapy water to remove glue from the rubber shoes. 

The Things You Should Prepare

• Soapy water
• A bucket
• An old toothbrush

Step 1 

First, open the laces of your shoes (if they have) because it makes your job easier, as you can easily handle the shoes. 

Step 2

Make 1 liter of soapy water by mixing 2-3 teaspoons of mild detergent. 

Step 3

Pour the water into a bucket, soak the rubber shoes in the water, and keep them resting for 1-2 hours. 

Step 4

Remove the shoes from the soapy water and gently rub them with the old toothbrush. The glue will come off with the brush, which is now soft to peel. 

Step 5

Rinse the shoes with clean water and keep them in your backyard for drying. 

Did you suddenly fall gorilla glue on your table tennis rubber? No issues, as removing gorilla glue is too easy with the right products and following the proper steps. Here, acetone nail polish remover may be a savior for you. 

The Things You Should Prepare

• Nail polish remover (that contains acetone)
• A small towel

Step 1

Apply nail polish remover on the gorilla glue-affected surface and wait for approximately half an hour.

Step 2

Wipe the dissolved glue with a towel and make the space glue-free. 

Step 3

Again, wipe the rubber surface with a damp cloth to remove glue stickiness and acetone odor. 

Step 4

Repeat the process if there is more glue. 

Note: It’s better to use acetone in an air-ventilated room to make the job safe. If you have sensitive skin, don’t forget to wear hand gloves to avoid touching acetone.

FAQs 

Can Goo Gone be used on rubber?

Yes, you can use Goo Gone on rubber shoes to remove glue from them. But, you have to avoid using it on silk, suede, or leather shoes. 

Will acetone remove superglue from rubber?

Yes, you can use acetone to remove superglue from rubber or almost everything. Just don’t use acetone on your silk cloth. You can check this post to learn how to remove glue from fabric, if you spill glue on your cloth. 

Since I have shown you my experience removing glue from rubber, you can believe these methods without any doubt.

In addition, I suggest you do the job with patience when using home products. You should also be careful not to damage your rubber surface for vigorous rubbing. 

Which method do you like the most and find the easiest to follow? Remove rubber glue with that method, and share your experience with me. It’ll inspire me to write more to solve your gluey problem. 

Have a wonderful day!

• Facebook
• Twitter
• LinkedIn
• More

The post How To Remove Glue From Rubber? appeared first on Tiny Helping.

In this tutorial guide, I will share multiple methods to remove tile glue. I’ll also attach a YouTube video to show you one method. So that you can follow any one among them, which you find easier. 

Lukewarm water, white vinegar, baking soda, cooking oil, toothpaste, etc., will be effective to dissolve tile adhesive as homemade solutions. But, for removing large space tile glue, you have to use chemical tile adhesive remover, hammer, and chisel. 

Though different chemicals containing adhesive removers are found in the market, you may be confused about what to choose and what not. So let’s know a list of top notch tile adhesive remover.

Goo Gone is one of the trusted brands that bring different sizes of glue remover by keeping in mind your needs. You can choose any size from its line that suits your budget. However, this glue is also effective in removing glue from tiles, glass, plastic, clothes, wood, metal, and many surfaces. 

Though WD-40 is a well-known grease remover in the automotive industry, it is excellent at removing glue from tiles. Interestingly, using this glue dissolver is too easy; just soaking and wiping. It also removes glue stickiness from the tile besides removing. 

If you don’t like any odor after removing glue from tiles, using mineral spirits will be the right option for you. The mineral spirits leave a low odor once you apply them on the surface to remove the glue. Even if you keep the surroundings ventilated, the odor will be minimal. 

• Blue Bear 500 MR Mastic Remover

This glue removing stuff unbelievably works on most surfaces to clean large-scale tile glue, carpet glue, vinyl flooring glue, etc. It won’t create too much fume while using because of its less than 3% VOC substances. 

Note: You can also collect these floor adhesive removers from eBay, and Walmart. No matter where you buy them and which adhesive dissolver you use, you have to keep them far from kids, pat, heat, and flame. 

As these removers contain chemicals, coming in touch with the eye, nose, tongue, or inhalation may be a health risk. Even if there is high heat around them, they may blast. So you have to be 100% careful while handling them and store them in a 100% safe place. 

You can use a dull butter knife or putty knife for cleaning small amounts of tile glue after using glue dis-solver. But for large room glue removal, you’ll need more powerful tools. Otherwise, you may find the job tedious and time-killing. There are so many different adhesive removing tools available in the market. Let me introduce some of them. 

You should keep a pole scraper in your toolbox as you can use it for removing tile adhesive, wallpaper, silicone, paint, and even tiles. Its handle is covered with rubber to grip it smoothly and comfortably. So there is no chance of generating sweat in your hand while working. Its 3 inches blade and 10 inches long tool is specially made for heavy-duty scraping. 

Having a set of multi-purpose razor scrapers is a blessing in solving your versatile problems. We recommend the Titan tool razor scraper, as its blade is designed by considering professional needs. It comes with two sizes of tools and multiple blades with multiple sizes, so that you can effortlessly use it for your DIY projects. 

A floor scraper is a versatile tool that can remove tiles, tiles adhesive, carpet, etc. It has a long adjustable handle from 3 feet to 6 feet. So that you can comfortably adjust its handle according to the space and your needs, its 8 inches blade will help you cover an ample space with one stroke.

If you already have an electronic power drill machine, buying a wire brush can be the best bet to remove the tile glue. But in that case, you have to carefully check your drill’s diameter and wire brush diameter to set them. The Forney is a heavy-duty wire brush scraper that will fit with any 1/4″ diameter electric drill. 

Now you know which adhesive remover and tools you may need to remove tile floor adhesive. So, it’s high time to discuss the methods of tile glue removal. 

You can remove glue from the tile floor with hot water and a simple chisel blade. Want to know, how? Here’s the process

The Things You Need

• Hot water (according to glue condition and space)
• A chisel blade
• Sponge

Process

• Carefully pour hot water on the floor and let the heat soften the glue. 

• After 2-3 minutes, when the water becomes cool to handle, hold the chisel at a 45° angle and press it against the glue. 

• Repeat the process until you remove the entire surface glue. 

• Finally, wipe the space with the sponge to clean removed glue and water. 

Do you apply many things to remove sticky tile glue from the floor but fail? It may happen because of using the wrong products and not following the proper steps. Never mind, now I’ll tell you the easiest and smartest way of removing sticky tile glue. 

The Things You Need

• A broom
• Goo Gone
• A razor scraper
• A clean rag

Process

• First, make the space clean by sweeping it with a broom. 

• Apply Goo Gone on the glued surface according to the glue residue and let it work to loosen the glue. 

• Now scrape the soft glue with the razor scraper until all the glue isn’t removed.

• Finally, wipe the space with a clean rag and chill! 

Spilling super glue on the tile floor makes the space messy. So you have to instantly take a step to remove them, to use less elbow grease and effort. Let’s see how to remove super glue from floor.

The Things You Need

• A dull butter knife
• Toothpaste
• An old toothbrush
• A clean cloth

Process

• First, remove the dried super glue chunk with the dull butter knife from the tile floor as much as possible. 

• Now, apply a thin layer of toothpaste on the glue, and rub the toothpaste with the old toothbrush for 2-3 minutes. 

• When the glue loosens, wipe them with a damp clean cloth.

Sometimes, you may find glue residue on your tile wall if there is a kid in the home. Here is the process of removing wall tile adhesive

The Things You Need

• A few drops of acetone
• A soft rag
• Soapy water
• A clean cloth

Process

• Spray acetone on the glued area and wait for 10-15 minutes to soften the glue.

• Now, damp a cloth with soapy water and wipe the space to remove the glue. 

• Then, again wipe the space with another clean cloth. 

Is there heavy-dried tile adhesive on the tile floor? You should use a wire brush and a power drill machine to remove the glue with less effort. Yes, applying commercial-grade adhesive remover is also efficient. However, here I’ll discuss using a power drill and wire brush. 

The Things You Need

• Safety gears
• A drilling machine with a wire brush
• A broom

Process

• First, wear a facemask, hand gloves, and goggles for your protection. 

• Attach the wire brush with the power drill machine by following the tool changing guidelines. 

• Now, connect it with electricity and swiftly rub the brush against the glue to remove.  

Tip: Don’t use the wire brush on one space too much time; it will eat up the top of the floor. Divide the whole floor into some equal sections, start your work. It’ll help you to remove glue from tiles efficiently. 

You have to use adhesive to install new tiles on the floor. But, when installing the tiles, the adhesive may fill up the grout. So before drying the tile adhesive, you should clean them to make the grout lines look more lucrative. 

The Things You Need

• A spray bottle
• Mineral spirits
• A sponge
• Clean rags

Process

• Carefully fill a spray bottle with mineral spirits and spray it on the grout. 

• After waiting a few minutes, wipe the gluey grout with a damp sponge when the glue is soft. 

• Then, rinse the area with soapy water to remove the glue residue. 

Though mosaic tiles aren’t that popular, some homeowners have them. Removing glue from mosaic tiles isn’t too tricky if you know the price. 

The Things You Need

• A pole scraper
• WD 40 
• Clean rag

Process

• Apply WD 40 on the affected tiles and let it sit there for a few minutes. 

• Now, scrape the soft glue with the pole scraper. 

• Wipe the loosened glue residue with a damp rag. 

Removing tile adhesive from porcelain tiles is so easy with Blue Bear 500 MR Mastic Remover. So let’s see how to use

The Things You Need

• Blue Bear 500 MR Mastic Remover
• A floor scraper
• Clean cloth

Process

• Apply as much Mastic Remover on the glued floor and wait a few minutes. Don’t be afraid to use more remover, as it has less VOC.

• Pry away the dissolved glue with the floor scraper until there is no glue residue. 

• Then, clean the glue residue and leave them in a waste bin

So after reading this guide on how to remove glue from tiles, you can efficiently do the job. But, before starting work, you should define the glue residue condition, amount, and method that will be more effective, and get ready with all the things you need. 

This simple strategy will minimize your working time and effort and maximize your efficiency.

• Facebook
• Twitter
• LinkedIn
• More

The post How To Remove Glue From Tile Floor? appeared first on Tiny Helping.

I designed this post to let you know how to remove glue from ceramic using glue dissolver or remover (homemade or chemical) and heat (hot water, heat gun, torch, hair dryer, iron). So, you can follow any method that you find easier. Let’s get started.

In most cases, food-safe ceramic glue is used for making or repairing ceramic food containers, or kitchen appliances. You can effortlessly remove these glue within some minutes. 

You can remove any ceramic or other glue with soapy water, petroleum jelly, lemon juice, olive oil, white vinegar, and baking soda. All those ingredients have cleaning agents or acid that effectively removes the glue.

If you use these homemade solutions, most of the processes to remove glue from ceramic are almost the same. So here, I share a master guideline to make the process easier. 

Step 1: Collecting tools

First, prepare any one of these ingredients, an old toothbrush, clean water, and a clean rug. 

Step 2: Prepare your solution

If you use soapy water, pour 2 teaspoons of dishwashing detergent into lukewarm water and make it soapy. 

If you use lemon juice, cut a lemon and squeeze half of it to get out its juice. 

If you use white vinegar and baking soda, make a paste with 2 parts of white vinegar and 1 part of baking soda. 

Step 3: Apply the solution

You must soak a cloth in soapy water over the glue. 

You can apply lemon juice, petroleum jelly, olive oil, white vinegar, and baking soda paste to the glued surface. 

Step 4: Wait to loosen the glue

Depending on the solution, your waiting time may vary. You have to wait for 25-30 minutes for soapy water, 15-20 minutes for lemon juice, and 10 minutes for olive oil, petroleum jelly, and baking soda paste solution. The cleaning agents or acid will work against the glue strength within this time. So, the glue will be soft to come off itself. 

Step 5: Rubbing the space

Grab the toothbrush and gently rub it on the glue for 3-5 minutes in a zigzag pattern or circular motion. When rubbing, you’ll notice the glue will be entirely loosened to clean. 

Step 6: Clean the glue residue

If the glue-affected ceramic item is large, you can clean the loosened glue by wiping it with a damp cloth. 

But if that is small, rinse it with clean water and wipe it with a dry clean cloth to make it dry. 

If you have to remove heavy glue from ample ceramic space, like tiles, sinks, and rooftop sheets, then using homemade solutions won’t be the right choice. 

Why? 

Because DIY glue removers aren’t efficient, they need more time, elbow grease, and effort. 

On the other hand, commercial glue remover will help you remove glue from ceramic with less effort, time, and energy than DIY removers. 

However, if you don’t like to use food items to remove glue, the chemical glue remover is also the right option for you.

So, are you thinking about which glue remover will be effective, easy to use, and budget-friendly? 

Don’t think, as numerous glue removers are available on the market. You can collect them from your nearest hardware shop or online. 

To make your online shopping a breeze, here I’ll mention some most popular glue removers with their buying link so that you can collect them with one click. 

• Acetone
• WD-40
• Goo Gone
• Goof Off
• Uni Solve wipes

So, I hope you have one among these glue removers to do your job. Fortunately, you’ll find these removers using the instructions on their label. That’s why it’s wise to read the labels to know how to use them. 

But, there are some people who have doubts about acetone and its work on ceramic. So they have a question like

It is partially yes and no, depending on the ceramic items and finishes. For finished and non-porous ceramic products, acetone may discolor or damage the ceramic. But for unfinished, porous ceramic, acetone is safe. So it is recommended to spot test acetone on a small inconspicuous part of the ceramic item before applying it to ample space to ensure its effectiveness. 

These commercial glue removers using processes are also almost the same as DIY removers. So, here I also write a master guideline to tell you how to remove super glue from ceramic with these.

Step 1: Prepare tools

It is said that good preparation is half the job. So you have to prepare your tools before starting the task. Keep the glue remover, a putty knife, a sponge, and a clean rag together. 

Step 2: Apply the remover

Spray the glue remover against the glue and let it sit.

If you use Uni Solve wipes, then you can skip this step. 

Step 3: Wipe the space

Now, grab the sponge and rub it on the glued area where you previously sprayed the glue remover. The glue will come off with the sponge as it is already soft due to the remover. 

For Uni Solve wipes, bring a wipe from the packet and wipe the glued area with it. 

Step 4: Clean the glue residue.

Again, wipe the space with a damp cloth to remove the chemical odor. 

Note: You have to use these chemical-based glue removers carefully. Because inhaling, coming in contact with your nose, eyes, tongue, or skin, you may feel irritation, itching, or rash. In that case, you must take first aid or professional doctors’ help as early as possible. Even though they are flammable, you should store them in a cool, dry, and safe place. 

You may be surprised to know that applying heat is also an effective method to remove glue from ceramic as well as metal or concrete floors.

Thinking, how? 

By melting glue. Yes, when you apply heat to the dried glue, it’ll melt due to heat. So you can effortlessly remove the melted glue from the surface with a damp cloth. Let’s see a step-by-step guide. 

Step 1: Prepare tools

A heat gun, torch, hair dryer, iron, and hot water are excellent tools for heat application. So get ready any one among them that you have in your home. You also have to prepare newspaper or cardboard if you use iron. 

Step 2: Generating heat

Most of them produce heat with the connection of electricity except for hot water. Insert the power cord into the power socket that tool you want to use, and wait around 30-60 seconds to let it generate heat. 

If you want to remove glue from ceramic tiles, you can use hot water. In that case, boil water depending on the glued surface. 

Step 3: Applying heat

Hold the torch, heat gun, or hair dryer 20-30 inches above the ceramic and apply heat until the glue melts. 

For using iron, place a thick layer of newspaper or a thin layer of cardboard on the ceramic surface before applying iron heat. 

Pour hot water on the ceramic tiles to loosen the glue with heat. 

Step 4: Clean the melted glue

Once the glue is melted, wipe the space with a damp cloth to clean. 

If you use hot water, scrape the soft glue with a plastic floor scraper, as only wiping won’t be as effective as scraping for removing ceramic tile glue. After that, clean the loosened glue and wipe the space. 

Note: When you follow this guideline, you should keep kids and pat far away from you. 

Before applying heat to more space, you can taste it in a small space to define the heat as there is no hard and fast heating level. Because it depends on the glue, ceramic thickness, and condition. 

Don’t apply too much heat to one specific space, as there is a high chance of damaging the ceramic. 

Gorilla superglue is excellent for bonding all kinds of materials. But removing this glue is challenging if you don’t know how to remove the dried glue. However, I’ll make the process easier by discussing an innovative glue-removing method. 

The Things You Need

• A clean rag
• Goof Off
• A clean cloth

Process

• Saturate the rag with a few drops of Goof Off, and wipe the glue-affected ceramic surface for 15-30 seconds.

• When the glue comes off with the rag, and there is no glue left, throw the rag into a waste bin. (If one rag becomes dirty and there is more glue, you can repeat the process with another Goof Off soaked rag)

• In this last step, clean the glued area with a damp cloth to remove glue residue and Goof Off odor. 

If you want to remove hot glue from ceramic, then Isopropyl Alcohol will be most effective. It also takes a few minutes to complete the task. 

The Things You Need

• Isopropyl Alcohol
• Cotton pad
• An old toothbrush
• Clean cloth

Process

• Pour a few drops of Isopropyl Alcohol on a cotton pad and place it on the ceramic for 5-10 minutes to loosen the glue.

• Remove the soaked cotton pad and gently rub the space with an old toothbrush. 

• Once you rub the entire glue-affected surface, wipe the space with a damp cloth. 

If you have a ceramic Christmas tree to celebrate your upcoming Christmas, it needs a lot of maintenance. Right? 

Cleaning, wiring, and decorating with snow are common tasks. You’ll need glue to attach snow to the tree, and here you have to remove the glue if you make a mistake. Let’s see how you remove glue from a ceramic Christmas tree.

The Things You Need

• Pure acetone
• Clean rag
• A putty knife
• A clean cloth

Process

• Soak the rag with acetone and wipe it on the Christmas tree where there is glue. 

• Now, gently scrape the soft glue with the putty knife without damaging the tree. 

• Finally, again wipe the space with a damp cloth to remove the scraped glue residue. 

Here I have shown you multiple methods on how to remove glue from ceramic cost-free and cost. So you can go with one of the methods that you find easier, faster, and more effective for your project. 

Trust me; all the methods will offer you more excellent results than your imagination. 

So why are you waiting? Collect the things you need, do the job, and share your experience with me through the comment section. 

• Facebook
• Twitter
• LinkedIn
• More

The post How to Remove Glue From Ceramic? appeared first on Tiny Helping.

Or do you get your metal home appliances sticky after removing stickers? 

No matter what the situation is, knowing how to remove glue from metal may help you keep them glue gunk or sticky residue-free. 

Using any DIY glue solvent or chemical glue remover will dissolve the glue and be the best bet to remove the glue from metal. Scraping the dried glue gunk or applying heat are other two excellent methods for metal glue removal. 

This comprehensive guide is designed to discuss every possible way to remove glue from metal. Here, I also include a short YouTube video, where you can get a visualization of my project. So get in touch with this article.

Maybe removing super glue from metal won’t sound as familiar as glass or plastic glue removal. But sometimes, you have to get off super glue from metal surfaces. You can remove glue with less effort and time by applying commercial glue remover, but that requires investment. 

When there are multiple options for metal surface glue removing that won’t cut your pocket, it’s definitely wise to apply these methods first. If they don’t work, you can go with chemical glue removers. 

Don’t you want to use acetone for removing super glue from metal? No issues. Petroleum jelly, cooking oil, peanut butter, toothpaste, lemon juice, vinegar, and baking soda are all good for metal surface super glue removal. Let’s learn how to use them.

Take some petroleum jelly from its container with your finger and apply it to the glued area of the metal. Keep it resting for 15 minutes to let the jelly’s lubricant work against the super glue. While the glue becomes soft, wipe the space with a damp rag to remove the super glue. Again wipe the space with a dry rag to dry the metal to avoid humidity. 

If there is a little blob of super glue on metal, you can remove the glue blob with toothpaste. Apply some toothpaste to the surface and rub it with an old toothbrush for 2-3 minutes. Toothpaste’s cleaning agent, sodium lauryl sulfate, will dispatch the glue. So by wiping the space with a saturated rag, you can easily remove the glue. 

First, moisten a cloth with hot water and squeeze it to remove excess water. Keep the damp cloth on the super glue for 1 hour. At this time, the glue will soften. Pour 1-2 teaspoons of lemon juice on the soft glue and gently rub with a soft sponge to remove the glue residue. 

You can use any cooking oil available in your kitchen such as olive oil, vegetable oil, coconut oil. Saturate a soft sponge with the cooking oil and swab the sponge on the glue to dissolve. After 1 hour, rub the loose glue with a toothbrush, and wipe the glue residue with a damp paper towel. 

1. Peanut butter or mayonnaise

You may be surprised to hear that peanut butter or mayonnaise are also applicable to get off super glue from metal. But, yes, their oily texture incredibly works for dissolving the glue. 

Apply a thin layer of peanut butter or mayonnaise that you have against the super glue area of the metal and wait around 1 hour to reduce the glue strength. Now, rub the space with your finger in a circular motion to lose the glue gunk and wipe the space with a damp rag to clean the glue residue. 

If the glue is too old and strong, you have to apply a more powerful DIY glue remover than those weak solutions. Here white vinegar and baking soda combination will be more effective. 

Make a paste with two tablespoons of white vinegar and one teaspoon of baking soda. Now apply the paste against the super glue and let it sit for 5 minutes. Then, wipe the dissolved glue with a damp cloth. 

Tip: As all of these are DIY glue removers, the number of ingredients and time may vary depending on your metal surface and super glue condition. 

If these homemade solutions don’t work for your metal adhesive, commercial glue remover can be the best option for you. Though these glue removers require a little investment, remove any adhesive from metal outstandingly. 

Pure acetone, or acetone-based nail polish remover, WD-40, isopropyl alcohol, Goo Gone, and Goof Off are most common glue removers. You can try any of them, and almost all of their using processes are the same. Let’s see how you use them.

The Things You Need

• A few drops of Acetone/WD-40/isopropyl alcohol/Goo Gone/Goof Off
• Cotton balls or pads
• Clean rag

Process

• Soak a cotton pad with glue remover and swab it against the metal adhesive area until the glue is softened.

• Wipe the loosened adhesive with a damp clean rag to clean the metal and get an adhesive-free shiny metal surface.  

Tip: As these commercial glue removers contain different chemical cleaning components, you should wear hand gloves and a facemask before using them. These protection gears will save you from inhaling and skin touch of the chemical.  

There are 7 different types of metal such as cast iron, aluminum, stainless steel, Magnesium alloy, copper, and chromium. So you should treat the item by knowing its component to get the best outcome. Now I’ll tell you about glue removing methods depending on their condition. 

You must find many stickers attached on the stainless steel fridge mentioning the brand, warranty, precautions, etc. Once the stickers become old, you have to peel them off. But, usually, they leave a gummy residue after peeling. In that case, you should know how to remove 10 year warranty sticker from Samsung refrigerator. 

The Things You Need

• A few drops of WD-40 
• A clean cloth
• A soft sponge

Process

• Saturate the cloth with WD-40 and gently wipe the glue residue surface in a circular motion to dissolve the glue. 

• Now, clean the sticker’s glue with the sponge. 

Tip: Don’t use an abrasive sponge on the stainless steel refrigerator, as it may scratch the surface and ruin its beauty.

Every day, you use many home appliances (Micro oven, dishwasher, pan, etc.) made of stainless steel or aluminum. All of these have stickers, and before using them, you have to remove the stickers.

The Things You Need

• A hairdryer
• Acetone wipes

Process

• Connect your hair dryer with power and set it on low heat. 

• Hold the dryer on the sticker surface for 20 inches and let the hot air loosen the stickers.

• Keep the hair dryer aside, peel off the sticker. 

• Wipe the sticker’s glue gunk with an acetone wipe. You can change the wipe if the first one becomes dirty. 

• Now, rinse the glue free appliance with soapy water.

The metal is painted to enhance its shininess and look gorgeous. If there is a super glue blob on the surface, that’ll ruin its beauty. So when you have to remove super glue from painted metal, you must be mindful to avoid scratching and damaging the paint. Let me show you how to remove super glue from metal without removing paint.

The Things You Need

• A few drops of Goo Gone
• A cotton pad
• Plastic razor blade
• Soapy water
• A soft sponge
• A paper towel

Process

• Soak the cotton pad in Goo Gone and swab the soaked pad on the excess glue for a few seconds. 

• When the glue is loose, gently scrape the loosened glue with the plastic razor blade. 

• Soak the sponge with soapy water and wipe the glued surface to remove the glue residue.

• Finally, again wipe the area with a damp paper towel to clean the soapy foam.

Putting super glue on the metal lock is one of the most common kids’ mischief. However, you may scold your kid for this, but that doesn’t mean the glue will be removed automatically from the lock. So, you should learn how to remove super glue from stainless steel locks. 

The Things You Need

• A plastic soup bowl
• 2 cups of white vinegar
• A soft rag
• A clean cloth

Process

• Fill up half of the soup bowl with vinegar and keep the lock into the vinegar by thoroughly soaking the super glue surface. 

• Wait 10 minutes, release the lock from the vinegar, and notice the super glue becomes soft. 

• Now, wipe the lock with the rag to remove the super glue and wipe it with a dry clean cloth. 

Tags or stickers are difficult to remove from metal doors by keeping the protective coating safe unless you know the right way. 

The Things You Need

• 2 parts of vegetable oil
• 1 part of baking soda
• A putty knife
• A few drops of acetone
• A paper towel

Process

• Make a paste with vegetable oil and baking soda, apply it to the sticker, and leave it there for 5-10 minutes.

• Rub the space with your finger, and scrape the sticker with the putty knife. 

• Moisten the paper towel with acetone and wipe it on the excess sticker residue that is left after removing the sticker. 

The window grill is mainly made of aluminum, and sometimes you find your hands are getting stuck with the grill when you touch it. It may happen due to your kids’ naughtiness. However, removing adhesive from it is ugly if you don’t follow the right glue remover and the right process.

The Things You Need

• A few drops of rubbing alcohol
• A butter knife
• A soft clean cloth

Process

• Spray rubbing alcohol on the aluminum glued area, and let the lubricant dissolve the adhesive.

• Scrape the softened glue with the dull butter knife and wipe the space with a clean cloth. 

Some renowned glue-producing companies offer the strongest bond within a few seconds. So, it will be beneficial if you try to remove them by knowing their components. Let’s talk about how to take off glue from metal by considering their brand and types.  

Though Gorilla super glue is waterproof, you can remove it from metal with oil and soapy water. Before embarking on the task, you have to arrange some equipment to do the work without hassle. 

The Things You Need

• A few drops of baby oil
• Dish soap
• Clean rag and cloth

Process

• Soak the rag with baby oil and sit the rag there for 5 minutes. 

• The oil will reduce the glue strength during this time, so now gently rub the area with a rag to remove the glue. 

• After that, damp a clean cloth into the soapy water and wipe it over the affected area to remove the glue residue. 

Does crazy glue spill on any metal surfaces while working on your crafting project? So now, you should remove the glue to make the metal glue spot-free. It’s not challenging to remove crazy glue from metal. Let’s see how you do that.

The Things You Need

• A few drops of rubbing alcohol
• Soft sponge
• A plastic spatula
• Paper towel

Process

• First, gently pry away the glue gunk with the plastic spatula as much as possible. 

• Now, pour the rubbing alcohol on the sponge and wipe the glued area. As rubbing alcohol contains chemicals, the glue will automatically come off with the sponge. 

• Finally, wipe the area with a damp paper towel to remove the chemical odor.

Loctite is one of the most effective glues that bond almost every material incredibly. However, there is no specific method to remove this glue from metal. Let’s see a short but straightforward technique on how to remove Loctite glue from metal.

The Things You Need

• A few drops of 70% isopropyl alcohol
• An old toothbrush
• A soft rag

Process

• Apply the 70% isopropyl alcohol to the glued surface and gently rub with an old toothbrush. When you rub the metal, most glue will break down due to alcohol and the gentle pressure of the toothbrush. 

• Now, wipe the soft glue with a damp rag and rinse it with soapy water. 

Using hot glue for joining two pieces of materials is excellent, but it is challenging to remove from most surfaces after drying. But don’t worry! You can remove the glue from the metal with your clothing iron. But how? Let’s see

The Things You Need

• A clothing iron
• A woolen cloth 
• A paper towel

Process

• Place a woolen cloth on the hot glue-affected area of the metal. 

• Connect the iron to a power source and set it to low heat. 

• Now, press the glued area with the iron over the woolen cloth. The iron’s heat will melt the glue. 

• Finally, wipe the melted glue with a damp paper towel. 

Tip: You can do the same thing with your hair dryer or a heat gun. However, when handling heating equipment, be careful to avoid burning yourself.  

PVA is the most non-toxic glue that is safe to use on food containers. It’s effortless to remove this glue from metal. 

The Things You Need

• A little toothpaste
• An old toothbrush
• A putty knife
• A soft rag

Process

• Apply a thin layer of toothpaste on the PVA glued area and rub it with the toothbrush for a minute back and forth as you brush your teeth. 

• Scrape the softened glue with the putty knife and wipe the space with a damp rag. 

All kinds of stickers left a strong glue residue after removing the sticker. Unless you clean the glue residue from the metal, you find the space sticky. As a result, your hand will be stuck there when you touch the space. So you should learn how to remove sticky residue from metal to avoid your hand getting stuck. 

The Things You Need

• A few drops of WD-40
• An old credit card
• A soft cloth

Process

• Saturate a soft cloth in WD-40 and lay the cloth over the sticker glue residue for a few seconds. 

• Next, scrape the soft glue gunk with an old credit card. 

• Finally, wipe the surface with a soaked cloth until the glue residue is gone. 

That’s all for today about my discussion on how to remove glue from metal. Hopefully, you can efficiently remove all types of glue and its residue from any metal surface. 

So, why are you waiting? First, try to use all these available items in your home and effectively remove superglue. 

You can use acetone or other commercial glue removers for vast glue gunk. 

If you find the information valuable, share it with your friends and family members so that they can learn this DIY skill.

• Facebook
• Twitter
• LinkedIn
• More

The post How To Remove Glue From Metal Like A Pro? appeared first on Tiny Helping.

Apply a few acetone drops/rubbing alcohol on a cotton pad and gently rub it on the glued surface to dissolve the glue. Then get off the softened glue with a damp paper towel. 

It’s a snapshot of the entire process. In this guide, I’ll talk about some effective homemade solutions that save your bucks and suggest some chemical glue cleaner. So read the guide and get glue residue-free plastic products.

There are multiple methods to remove super glue from plastic. Some methods require food ingredients, and some methods require chemical agents. However, depending on the methods, super glue removal process, working time, and required things will be different. 

First, I’ll share some homemade remedies and then commercial cleaners to get off the super glue from plastic. So you can follow any method that you find convenient and easy.

You have mild dishwashing soap, vinegar, baking soda, and cooking oil in your kitchen, don’t you? So why not try these things to remove super glue from plastic instead of their regular work. 

Thinking, how? Let’s see

Most dishwashing detergents have an active cleaning ingredient named Triclosan. It works great for killing bacteria and fungus. Triclosan is also effective in removing super glue from plastic, but it takes more time.  

• Make soapy water with 2-3 teaspoons of mild detergent and soak the glued area of the plastic for 5-6 hours. Within this time, the glue will be softened. 

• Now, scrub the soft glue with a sponge to remove the glue and rinse it with clean water. 

• Finally, wipe it with a dry cloth.

White vinegar and baking soda combination make a strong cleaner that is incredibly effective in removing glue from plastic. You can also use olive oil or coconut oil as a vinegar alternative. Because when you mix baking soda with oil, that makes a paste that is great for removing any stubborn dirt from any surfaces. 

• Pour 1 teaspoon of baking soda and vinegar into a cup and string them to make a paste, like pancake batter. 

• Apply the paste over the super glued surface of the plastic with a cotton pad.

• After 15 minutes, scrub the area with a sponge or your fingers to loosen the glue. 

• Now, rinse the plastic with clean water and wipe it with a dry cloth. 

Are you too busy with small kids and don’t have time to follow ordinary homemade solutions? Nothing to worry about!

Some commercial glue removing liquid can instantly remove adhesive residue from plastic surfaces. 

Acetone-based nail polish remover, rubbing alcohol, Goo Gone, Goof Off, and paint thinner, are some of these glue removers that you can purchase from your nearest shopping mall or online. If you love to buy them online, my affiliate link will take you to Amazon, from where you can collect the glue remover. 

So, once you have got your preferred glue remover, it’s time to know about the process of how to use them to get glue residue-free plastic items. As all of these glue-removing formulas using process is the same, that’s why I’ll share a simple step-by-step guide to use them efficiently. 

The Things You Need

• A few drops of nail polish remover/ rubbing alcohol/Goo Gone/Goof Off/paint thinner (or according to the glue residue)
• Soapy water
• Microfiber cloth

Process

• Moisten a microfiber cloth into the remover and rub it on the plastic glued surface for 30-60 seconds. The chemical agent of the formula will reduce the glue strength within this time. 

• Now, wipe another cloth on the surface to remove the glue. 

• For more glue guns, you can repeat the process. 

• Rinse the plastic with soapy water to clean the glue’s white film.

• Again rinse with clean water and wipe dry cloth. 

Tips:

To avoid plastic scratching, never rub it forcefully and use multiple glue removers at a time

Plastic lances, water bottles, window frames, kids’ toys, and shipping bags are everyday plastic items that you use. All of these things have attached labels on them. But as time passes, the labels become dirty. So you have to peel them off. 

However, once you peel the label off, glue residue will be visible on the surface that looks sticky. Moreover, this sticky glue residue will attract oil grease, making it more sticky. Now I’ll show you some simple tactics to remove the glue residue depending on the plastic items. 

Usually, I wear plastic lens eyeglasses to protect my eyes from air, dust, and debris. Once I was working with super glue for crafting projects. Unintentionally I kept my glasses on the workstation and glued my fabric. But alas! Suddenly one drop of super glue fell on the plastic lenses. 

I removed the super glue from the plastic lenses with toothpaste. The toothbrush’s cleaning agent, Sodium lauryl sulfate, works excellent for glue removal. Let’s see how I did that.

The Things You Need

Process

• First, apply ½ teaspoon of toothpaste to the affected area and rub it with your finger for 1-2 minutes. 

• Then rinse the lenses with clean water and dry them with cotton pads. 

To get a visualization of the process, check this short video. 

Almost all kinds of plastic bottles and containers have stupid glue skid marks after removing their label. However, you can easily clean the glue skid marks from the bottles within a few minutes and with less elbow grease. Here I’ll describe a simple way to let you know how to remove labels from plastic bottles for recycling. 

The things you need

• Razorblade 
• A few drops of Goo Gone
• Cotton pad 
• Clean water
• Soft microfiber cloth

Process

• First, gently pry away the stickers and their adhesive residue with a razor blade from the bottle as much as possible. 

• Now, soak the cotton pad with Goo Gone and scrub the glued area for 30-60 seconds. 

• Rinse the bottle with clean water and wipe it with a soft clean microfiber cloth. 

• Finally, keep it resting in an airy place to air dry it. 

Do you frequently purchase your required things online? If so, then you must receive your ordered items with good packaging. You’ll find different shipping labels attached to the bag, where the product’s name, amount, shipping address, etc. are written. To reuse these plastic bags, you have to get off these labels without damaging the bags. 

Do you frequently purchase your required things online? If so, then you must receive your ordered items with good packaging. You’ll find different shipping labels attached to the bag, where the product’s name, amount, shipping address, etc. are written. To reuse these plastic bags, you have to get off these labels without damaging the bags. 

Do you frequently purchase your required things online? If so, then you must receive your ordered items with good packaging. You’ll find different shipping labels attached on the bag, where the product’s name, amount, shipping address, etc. are written. To reuse these plastic bags, you have to get off these labels without damaging the bags.

The Things You Need

Process

• Run the air dryer and hold it over the shipping labels for 15-30 seconds. The hot air will loosen the glue strength. 

• Keep your air dryer aside and peel away the label from the shipping bag. 

Kids’ hard toys like cars, airplanes, guns, etc., are mostly known as models. Removing super glue from the models isn’t tricky if you know how to do:

The Things You Need

• A few drops of acetone
• Cotton pad 
• Soft microfiber cloth

Process

• Moisten the cotton pad with acetone and swab it on the glued surface for 40-60 seconds. 

• Now, remove the soft glue with another cotton pad. 

• Finally, wipe the model with a soft cloth to clean the glue haze. 

UPVC tape is used to bond window frames or attach labels to them. After peeling away the tape, it leaves a glue stickiness. Unless you remove the glue, it doesn’t look pleasant.

The Things You Need

• Mr Clean Magic Eraser
• Microfiber cloth
• Paper towel

Process

• Now wipe the window frame with the pad for 45-60 seconds. The chemical agent of the pad will loosen the glue from the surface. 

• Again wipe the frame with a damp cloth to remove the soft glue gunk. 

• Finally, wipe it with a dry paper towel. 

Almost all of us use phone back covers or cases as a preventive step to enhance the phone’s lifespan. Plastic phone cases are economical, easy to use, and clean. So that if you mistakenly glued your plastic phone case, don’t worry. Here’s the simple process for how to get super glue off plastic phone case. 

The Things You Need

• A rag
• A few drops of rubbing alcohol
• A microfiber cloth

Process

• Moisten the rag with rubbing alcohol and rest on the glued phone case for 15-20 minutes. 

• After that, scrub the soft glue with the rag and remove them. 

• Finally, clean the case with another damp rag and wipe it with a dry microfiber cloth. 

Most kids’ toys have plastic windshields, and if that comes into contact with super glue, it leaves a haze on it. So that the kids can’t see clearly through the windshield. However, removing super glue haze from plastic is very simple.

The Things You Need

• A cotton bar
• ½ teaspoon of petroleum jelly
• Putty knife
• Clean rag

Process

• Soak the cotton bar into the petroleum jelly and rub it for 1-2 minutes on the super glue haze. 

• Now, scrap the soft glue with a safety putty knife. 

• Wipe the windshield with a damp rag and a dry rag.   

If you remove super glue depending on its brand and type, that will be more effective. Because all brands and types of glue require unique removal treatment. 

Gorilla glue is prominent in bonding almost all kinds of things, including glass, fabric, plastic, etc. Once it bonds anything, it’ll last years after years. However, removing Gorilla glue is not that complicated if you remove it before drying. 

The Things You Need

• A few drops of acetone
• Abrasive sponge
• Razor knife
• Clean rag

Process

• Soak the sponge with acetone and rub the plastic’s glued surface for dissolving.

• Pry away the dissolved Gorilla glue with the razor knife until all the glue comes off.  

• Now, clean the glue residue with the damp rag

Krazy glue is really crazy to bond any materials. So most crafters and DIY homemakers keep it in their toolbox to create new crafting or instantly bond any broken things. The crazy glue using and removing procedure is very simple. Let’s see how to remove Krazy glue from plastic.

The Things You Need

• An old toothbrush
• A few drops of Goof Off
• Clean rag

Process

• Soak the toothbrush bristle with Goof Off and rub the glue with the wet toothbrush until the glue is dissolved and comes with the toothbrush. 

• Now, wipe it with the damp, clean rag to remove the glued loose debris. 

Using a hot glue gun makes your work easier and faster than regular glue. But, if you can’t deal with the hot glue gun carefully, it’ll make your working space messy. Now, I’ll show you how to remove dried hot glue from plastic with little effort and time. 

The Things You Need

• A few drops of rubbing alcohol
• Dull butter knife
• Abrasive sponge
• Clean rag

Process

• Apply rubbing alcohol on the plastic hot glued surface and rub the area with the sponge for 45-60 seconds. Rubbing alcohol and your little elbow grease will dissolve the dried hot glue.

• Now, scrap away the hot glue chunk with the butter knife and clean the space with a damp rag. 

As epoxy glue is non-toxic and food-safe, it is used to make and repair plastic cooking utensils. But, if a white film is visible after curing, that is unpleasant to see. So, it’s essential to remove the epoxy glue from plastic. 

The Things You Need

• A few drops of acetone
• Soft sponge
• Butter knife

Process

• Saturate the sponge with acetone, rub it on the plastic in a circular motion, and then keep it on the surface for 5 minutes to soften the glue. 

• Then, after removing the sponge, pry away the glue with the butter knife. 

• Finally, wipe the space with a clean damp rag.

PVA glue is well-known as a non-toxic glue that offers incredible bonding on fabrics and most surfaces. As it is a water-soluble glue, removing it from plastic isn’t too tricky. 

The Things You Need

• Warm water
• Mild detergent
• A large size soup bowl
• Abrasive rag

Processing

• Fill half of the soup bowl with warm water and dilute mild detergent to make the water soapy.

• Soak the plastic glued surface in soapy water for 30 minutes.

• Now, rub the space with the rag to clean soft glue. 

You must notice sticky and gummy surfaces after peeling off any stickers from the plastic products. Isn’t it irritating to touch? Absolutely. Here’s how to remove sticky labels from plastic without scratching. 

The Things You Need

• Nail filer
• A few drops of Rubbing Alcohol
• Soft cloth

Process

• Try to peel off sticker and sticker residue from the plastic surface as much as possible with the nail filer. It’ll make your cleaning process shorter. 

• Soak the cloth with rubbing alcohol and rub it on the sticky tape residue for 40-60 seconds.

• Finally, wipe it with a damp cloth to remove the alcoholic odor and loosen glue debris. 

Polycarbonate is known as clear plastic that is used in manufacturing companies. It is stronger and more expensive than polystyrene and acrylic plastic. So, you have to be mindful while removing glue from it. 

The Things You Need

• A few drops of acetone
• Clean rags

Process

• Moisten a rag with acetone and gently scrub it on the clear plastic’s glued surface for 20-30 seconds to saturate the glue. 

• Now, take another piece of rag and wipe it thoroughly to clean the soft glue gunk.

This is the end of my detailed comprehensive guide on how to remove glue from plastic. I have discussed multiple solutions here, so you can quickly go with any methods that you find easy to follow, depending on your plastic items and glue types.

Once you try any method, don’t forget to share your experience with me by leaving a comment. Your comment will inspire me to share more DIY home improvement skills.

• Facebook
• Twitter
• LinkedIn
• More

The post How to Remove Glue from Plastic? appeared first on Tiny Helping.

It was disappointing and frustrating. However, I managed to remove super glue from my phone screen. 
Shall I share the steps on how to remove super glue from phone screen at home within 5 minutes?

First, it may seem that removing super glue from a phone screen is daunting. That’s not the case. Let’s explore the steps of removing super glue from the phone screen.

Step 1: Gather the tools

You won’t need too many tools to perform this DIY job. Simple 3 things are enough. Such as

• Acetone-based nail polish remover
• A cotton pad
• A window cleaner (Optional) 
• A paper napkin

Step 2: Apply Acetone

Soak the cotton pad with acetone and leave it on your mobile screen for 4-5 minutes. During this time, the chemical reactions of acetone will dissolve the superglue. 

Step 3: Rub the cotton pad

Gently rub the soaked cotton pad on the glistening glued area in a circular motion. The super glue broken chunk will come with the cotton pad. 

I could successfully remove super glue from my phone screen on the first attempt. If your phone screen has a large volume of super glue, it may need a second attempt. 

Step 4: Apply window cleaner

Spraying a small amount of window cleaner and wiping the screen with a soft paper towel rejuvenates the screen’s shine as new. 

Damn shit! Dropping kiss nail glue on your brand-new iPhone screen while wearing fake nails. 

Calm down, my friend. Removing nail glue from the phone screen is as simple as boiling an egg for breakfast. 

• If you notice nail glue on the phone screen as soon as it drops. Let it harden.

• Damp a cotton ball or pad with Acetone nail polish remover. (Don’t drip the acetone on the screen, as it may run and enter into the charging port or speaker or make a gigantic mess) 

• Place the soaked cotton pad on the screen’s glued surface and gently press it for 30 seconds. 

• Leave it there for 2-3 minutes until the glue is dissolved. 

• Next, wipe the screen with the cotton ball to remove the loose glue. 

• Clean the screen with soft tissue paper. That’s it.

Don’t have a nail polish remover at home right now to remove super glue from the phone case. Thinking about buying…

No need. Many household items (Cooking Oil, Mayonnaise, Toothpaste, etc.) work excellently, removing the super glue from the phone screen. 

Hopefully, you have one on the list. That’s great.

• Put a few drops of coconut or other cooking oil on a soft, clean, and lint-free cloth. 

• Leave the cloth on the gluey phone case for 10-15 minutes. 

• Now, gently rub the screen with the damp cloth.

• Take another piece of cloth and soak it with soapy water. Squeeze it to remove excess water. 

• Wipe the screen with a soaked cloth to remove the glued sticky residue and oil’s sticky texture. 

• Again wipe the screen with a dry cloth to ensure no watery hue.

No, you can’t use superglue on your phone screen. The main ingredient of super glue, cyanoacrylate, won’t work well on a phone screen. More importantly, it may damage the phone screen and make it useless. 

If you strongly need glue for your phone screen, use Cridoz T-7000 Adhesive Glue, specially formulated for cell phone screen repair. 

Never hustle and bustle while handling super glue, and keep your phone far to avoid this tribble situation. 

However, getting off super glue from the phone screen isn’t a big deal. So there is absolutely nothing to worry about. 

Be smart about using superglue. Have fun, get strong bonds and make exquisite crafts. 

• Facebook
• Twitter
• LinkedIn
• More

The post How to Remove Super Glue from Phone Screen? appeared first on Tiny Helping.

If so, at first glance, you may think, what a glue catastrophe happened to your favorite belonging, right? 

I can understand your situation, as I also thought like this when I glued my leather chair while gluing ribbon to design my dress. 

However, in this post, I’ll share my experience with my captured images and a YouTube video on how to remove glue from leather. 

Though I attached one method’s images and video, you can do it with multiple products available at your home.

I suggest some commercial glue removers and discuss how to get the glue off the leather with these. 

That means I ensure your problem will be solved once you read and apply the methods. So let’s get to the point. 

Peanut butter, any oil or lubricant (coconut oil, olive oil, canola oil), toothpaste, white vinegar, all of these household items are performed incredibly to remove glue from skin and hair on any surface. No matter what you use from the list, almost the process of removing glue from leather is the same. So I’ll discuss them with comprehensive instruction. 

But before embarking on your glue-removing job, you must prepare yourself with the necessary things. 

The Things You Need

• Any lubricant or toothpaste
• An old toothbrush
• Cotton balls
• Soapy water
• Clean clothes 
• Leather conditioner (Optional)

Step 1: Apply the solution

• What is available at your home (white vinegar, oil, peanut butter, toothpaste), apply it to the glue-affected leather with your fingers or cotton ball. 

• You can mix one part of white vinegar with one part of water to reduce its odor. 

• Now, wait 5-10 minutes to let the solution work and make the glue soft. 

Step 2: Scrape the glue

• When the glue is soft, if you gently rub it with an old toothbrush, the glue will come off. 

Step 3: Cleaning the glue residue

• Once you ensure no hard glue is left, wipe the surface with a soapy damp cloth. 

• Again, wipe the same space with another clean water damp cloth and air dry. 

Step 4: Apply leather conditioner

If you want to get back the shininess of your leather goods, you can apply a good leather conditioner. If you don’t, you can skip this step. 

Important Note:

If you vigorously rub, you may scratch the leather’s top surface. So, you have to do it with patience to avoid its damage. 

If you want a more intense method, applying heat can be a good option with danger. 

Why?

Because if you apply more heat to one specific space of your leather item, excessive heat may shrink the leather, which isn’t absolutely expected. 

So I recommend you follow this method with extra care and consciousness as your target is to make the glue soft, nothing else. 

But, alas! I didn’t tell you the method, so how do you follow that? 

Let’s know how to remove adhesive from leather furniture with heating treatment. 

The Things You Need

• A heat source (Hair dryer or heat gun)
• A sheet of newspaper
• Soapy water
• A dull edge scraper (butter knife, teaspoon’s handle, Emery board)
• A cotton balls
• Soapy water
• A clean cloth
• Leather conditioner (Optional)

Step 1: Scrape hard glue

• If you can scrape as much glue from the leather surface, your further work will be easier. So gently scrape the hard glue from leather without ruining it. 

Step 2: Spread newspaper and apply heat

• To do the task from the safe side, spread a newspaper sheet on the leather. 

• Connect your hair dryer or heat gun with a power source, and set the heat to the lowest. 

• Apply heat from the 8-10 inches above the leather for 30-60 seconds. 

Step 3: Wipe the soft glue

• Dunk a clean cloth into soapy water, and when the glue becomes soft, wipe it. 

• Apply heat and wipe the soft glue repeatedly until you notice the leather’s glue residue. 

Step 4: Air dry the leather and conditioning

• When you have removed all the glue, keep it in an airy space for air drying. 

• Then, apply a leather conditioner to rejuvenate its shine.  

Do you think I have forgotten you, who is super busy with kids, corporate work, or business? 

No, my friend, how can I forget you as I have also led a busy life with tons of workload on my shoulder. Just kidding

But, yes, I also have to maintain versatile responsibilities in my personal and professional life. 

Considering your hectic life, I’ll introduce your most exclusive Loctite glue remover; which is crazy to remove glue. But you can’t do the job efficiently until I tell you the Loctite Glue Remover instructions. 

The Things You Need

• Loctite glue remover
• Sponge
• Warm soapy water
• Terry cloth
• Scraper

Step 1: Apply Glue Remover

• Open the glue remover cap, and apply as much glue remover as you need depending on the glue amount and stain. 

• Wait a few minutes to break down the glue from the leather surface. 

Step 2: Peel the glue

• When the glue is soft, peel them with a flat scraper without forcing too much. 

Step 3: Clean the glue

• Rinse the gluey area with soapy water (if possible) or wipe the space with a damp cloth. 

• Air dry and condition the leather to maximize its lifespan and shine. 

A countless number of products are made with leather. Some of these are clothes, shoes, purses, hand gloves, furniture, watches (lace), accessories, sports equipment, etc. 

Moreover, all of these items require different types of leather to make with different thicknesses. That’s why it’s not wise to treat all the products equally while removing the glue. 

In this discussion segment, I’ll prefer to show you specific ways to remove the glue. 

There are different types of footwear like shoes, boots, sneakers, sandals, etc. Most of these are made with leather and rubber. 

And when making these shoes, glue is mandatory. Knowing how to get super glue off leather shoes, will save your shoes if there is more glue than needed. 

The Things You Need

• Acetone or 70% rubbing alcohol
• Cotton balls
• Soapy water
• A clean cloth
• Leather conditioner (Optional)

Process

• Saturate the cotton balls with acetone or alcohol and keep the soaked balls against the gluey area of leather shoes. Wait 4-5 minutes to soften the hard super glue. 

• Damp the cloth into the soapy water and wipe the softened glue with it. 

• If there is more glue, you can gently scrape them with a dull butter knife. 

• Clean the glue residue with another damp cloth and wait for drying. Apply leather conditioner if you want. 

Important Note: You can use acetone or alcohol on light-colored leather shoes. But if you want to preserve your shoes after removing glue, it’s not recommended to use acetone on leather as it may weaken the leather structure. In that case, homemade remedies may be good to go. 

However, are you thinking about how to remove sticky residue from leather shoes? Follow the above instructions and get sticky residue-free shoes.  

Various gents’ or ladies’ wallets, purses, and bags are made with leather. Though there is less chance of spilling glue over these, it may happen to you if you are unfortunate. In this situation, you should know how to remove sticky residue from leather purse. 

The Things You Need

• Sandpaper
• Elmer’s Sticky Out Adhesive Remover
• A hand towel

Process

• Gently sand the hard glue surface of the leather bag back and forth with the sandpaper. This will help you to remove hard glue. 

• Wipe the soft glue from the bag with a damp towel and use a leather conditioner. 

No matter which automobile you use, most of these have leather seats. And when your kids eat burgers, Toffee, chocolate, and candy, in the car, you must find that the car seat is getting sticky with food debris.

The Things You Need

• Any oil or WD-40
• Cotton balls
• A microfiber cloth
• A paper towel

Process

• Dunk the cotton balls with any available oil or WD 40 and keep them on the sticky residue of the car seat until dissolving. 

• Now, press the microfiber cloth on the soft sticky residue or chewing gum. You’ll notice all the residue will come off with the cloth itself. 

• Now, wipe the same space of the car seat to clean it. 

Isn’t it disgusting to notice adhesive residue after removing stickers from the dashboard? Absolutely, if you don’t know the easiest way to remove these adhesives, I can help you. 

How? 

By letting you know the process in a few steps. 

The Things You Need

• Acetone
• A soft sponge
• A clean cloth

Process

• Soak the sponge with acetone or nail polish remover and wipe the dashboard with the soaked sponge. 

• Once you notice the adhesive loosened due to acetone’s chemical reaction, wipe the dashboard with a dry cloth to remove the adhesive. 

If you have kids, finding chewing gum in the leather sofa, chair, or jacket is a common scenario for most parents. You’ll reveal this when your hand gets stuck with the chewing gum. 

The Things You Need

• Oil or peanut butter
• A clean towel
• A damp cloth

Process

• Soak the chewing gum with oil or peanut butter and let it soft. 

• Now, press the soft chewing gum with the towel. The chewing gum will come off with the towel for your pressure. 

• Wipe the sticky leather with a damp cloth to eradicate the chewing gum stickiness. 

Faux leather is also a kind of leather that is used for making many upholsteries. As they are economical, many people use them. But, you may find the leather gets sticky for many reasons. Not to fret, as you can remove it with easy steps. 

The Things You Need

• An emery board
• White vinegar
• Water
• A spray bottle
• A clean cloth

Process

• First, gently rub the emery board or the handle edge of a spoon to remove the sticky blob and reach the main leather surface. 

• Make a solution with equal amounts of water and white vinegar and pour it into a spray bottle.

• Spray the solution on the sticky area of the faux leather and let the solution work to reduce the sticky residue strength. 

• Wipe the loosened sticky residue with a clean cloth to clean it. 

Gorilla glue is popular among DIYers and crafters due to its immense bonding strength and fast curing. However, you also may need to remove this glue from the leather. 

The Things You Need

• 3M General Purpose Adhesive Cleaner
• A microfiber cloth

Process

• Clean the soft glue by wiping the leather with the saturated clean cloth. 

How To Remove Crazy Glue From Leather

If you spill crazy glue on leather products, you have to remove it. Otherwise, it’ll be your eyesore. 

The Things You Need

• Olive oil
• Cotton pads
• Soft clean cloth

Process

• Soak the cotton pads with olive oil and place them on the gluey leather. Oil needs 5-15 minutes to break down the glue bond.

• Now, clean the soft glue residue with a damp cloth until you find the space glue-free. 

Have you spilled nail glue on leather seats while attaching fake nails with kiss nail glue? If so, nail polish remover will be the best bet for you to remove it. 

The Things You Need

• Acetone-based nail polish remover
• A dull butter knife
• A soft sponge

Process

• Apply nail polish remover on the area of leather nail glue and let it work to dissolve. 

• Gently scrape the soft glue with a dull butter knife without damaging it. 

• Finally, clean the loosened glue residue with a damp sponge. 

The Things You Should Consider While Removing Glue From Leather 

• You have to check the leather surface, its thickness, and the types of products from where you remove the glue. 

• First, you should apply the chemical glue remover, especially acetone, to an invisible area of the leather to check whether it damages your leather or not. 

• Always you should handle commercial glue removers with proper care. They may cause health risks if you inhale or get in touch with your nose, eyes, and other sensitive body organs.

That’s the overall discussion on removing glue from leather depending on various situations.  

So, get ready, remove glue from leather with easy steps, and enjoy. 

If you find the information valuable, don’t forget to share it with your friends. 

If you have any questions on glue, let me know. I love to answer based on my knowledge and experience. 

Have a good day!

• Facebook
• Twitter
• LinkedIn
• More

The post How To Remove Glue From Leather? appeared first on Tiny Helping.